To find the IP address assigned by the Internet Service Provider (ISP), use these steps:Ĭonfirm your public IP address in the first result. You'll also need the remote network's public IP address to contact the device over the internet.
MONECT PC REMOTE PRO HOW TO
If you want to use this option instead, you can consult your manufacturer support website for specific steps on how to complete this task. Some routers include a feature to make the current TCP/IP configuration static. Quick tip: If you can't connect to the internet, you may also want to try using one of the Google Public DNS addresses (such as 8.8.8.8) for the "Alternate DNS server" option.Īfter you complete the steps, the new network configuration will apply, and the IP settings will never change. Under the "Use the following DNS server addresses" section, in the "Preferred DNS server" field, specify the IP address of your DNS server, which in most cases is also the address of the router -for example, 10.1.4.1.
Specify the default gateway address, which is the router's address-for example, 10.1.4.1.Specify a subnet mask for the network (for example, 255.255.255.0), but the system usually fills this infomration for you based on the "IP address" you entered earlier.If you're unsure of the configuration you have to use, you can use your current TCP/IP configuration as a reference, which you can find running the ipconfig /all command in Command Prompt. The routers' interface is always different per manufacturer, which means that you may need to consult your manufacturer support website for more specific details. Quick tip: Typically, you'll find this information on the router inside the DHCP settings section. Specify a valid local IP address outside the local DHCP scope to prevent address conflicts. Select the Use the following IP address option.Select the Internet Protocol Version 4 (TCP/IPv4) option.Right-click the active adapter and select the Properties option. To set a permanent IP address configuration, use these steps:Ĭlick the Change adapter settings option from the left navigation pane. If you plan to use remote desktop often, you may want to configure a static IP address to avoid reconfiguring port forwarding on the router when the computer gets a new address.
MONECT PC REMOTE PRO WINDOWS
Configure static IP address on Windows 10Ĭomputers usually get assigned dynamic IP addresses from the DHCP server (router), which means they can always change. A process that also requires knowing the public address to contact the remote computer. If you have to access the computer over the internet, you will also have to configure the router (modem) to allow the remote connection. If you're trying to connect to another device within the local network, you can skip to the steps below, and continue with the start a remote desktop connection instructions.
If you're setting up a remote desktop using an internet connection, continue with the steps below. Turn on the Enable Remote Desktop toggle switch. You can also enable the Remote Desktop feature using the Settings app with these steps:
MONECT PC REMOTE PRO WINDOWS 10
Windows 10 will even add the necessary rules in the built-in Microsoft Defender Firewall, but you may need to configure the rules manually if you have a third-party firewall. Once you complete the steps, remote desktop connections will be allowed on the device.